16 часов назад, AHristich said:

Проверьте свободное место на диске и почистите от старых логов и т.п...

Это касается не только кэша. Есть еще на сервере папки log,tmp и т.д,куда тоже записывается информация. А то что у вас 10-20гб свободных ни о чем пока не говорит,потому что смотря в каком разделе диска,/home,/,/var или вообще не примонтировано в системе.

Да и видать секретная информация о конфигах рнр и mysql,если до сих пор так и не предоставили...

Однозначно,что какой-то скрипт не вписывается в лимиты по времени.

Одно дело конфиги под старую ,и не так сильно требовательную, версию и совсем другое под новую и требующую уже другие ресурсы сервера.

2 часа назад, AHristich said:

Это касается не только кэша. Есть еще на сервере папки log,tmp и т.д,куда тоже записывается информация. А то что у вас 10-20гб свободных ни о чем пока не говорит,потому что смотря в каком разделе диска,/home,/,/var или вообще не примонтировано в системе.

Да и видать секретная информация о конфигах рнр и mysql,если до сих пор так и не предоставили...

Однозначно,что какой-то скрипт не вписывается в лимиты по времени.

php-fpm.confВот php, а что нужно из mysql? Какой конкретно конфиг?

php-fpm.conf

28 минут назад, Cool2Play said:

php-fpm.confВот php, а что нужно из mysql? Какой конкретно конфиг?

php-fpm.conf

рнр 8.1 конфиг

Здесь отобразите ,не у всех может открыться файл в телефоне.

У вас на сервере панель управления хостингом установлена или вы вручную все серврное ПО ставили?

php-fpm это не php.ini-файл, а файл настройки именно FPM-процессов. Я же говорил имено про рнр.ini

14 минут назад, AHristich said:

рнр 8.1 конфиг

Здесь отобразите ,не у всех может открыться файл в телефоне.

У вас на сервере панель управления хостингом установлена или вы вручную все серврное ПО ставили?

Хостингом

[%domain%]

listen = /run/php/php%backend_version%-fpm-%domain%.sock

listen.owner = %user%

listen.group = www-data

listen.mode = 0660

user = %user%

group = %user%

pm = ondemand

pm.max_children = 20

pm.max_requests = 4000

pm.process_idle_timeout = 10s

pm.status_path = /status

php_admin_value[upload_tmp_dir] = /home/%user%/tmp

php_admin_value[session.save_path] = /home/%user%/tmp

php_admin_value[open_basedir] = /home/%user%/.composer:/home/%user%/web/%domain%/public_html:/home/%user%/web/%domain%/private:/home/%user%/web/%domain%/public_shtml:/home/%user%/tmp:/tmp:/var/www/html:/bin:/usr/bin:/usr/local/bin:/usr/share:/opt

php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f admin@%domain%

env[PATH] = /usr/local/bin:/usr/bin:/bin

env[TMP] = /home/%user%/tmp

env[TMPDIR] = /home/%user%/tmp

env[TEMP] = /home/%user%/tmp

@Cool2Play , у вас в панели должен быть раздел настроек рнр,где устанавливаете лимиты,типа memory_limit

Интересует файл именно php.ini

2 минуты назад, AHristich said:

@Cool2Play , у вас в панели должен быть раздел настроек рнр,где устанавливаете лимиты,типа memory_limit

Вот, пожалуйста

[PHP]

;;;;;;;;;;;;;;;;;;;

; About php.ini ;

;;;;;;;;;;;;;;;;;;;

; PHP's initialization file, generally called php.ini, is responsible for

; configuring many of the aspects of PHP's behavior.

; PHP attempts to find and load this configuration from a number of locations.

; The following is a summary of its search order:

; 1. SAPI module specific location.

; 2. The PHPRC environment variable. (As of PHP 5.2.0)

; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)

; 4. Current working directory (except CLI)

; 5. The web server's directory (for SAPI modules), or directory of PHP

; (otherwise in Windows)

; 6. The directory from the --with-config-file-path compile time option, or the

; Windows directory (usually C:\windows)

; See the PHP docs for more specific information.

; https://php.net/configuration.file

; The syntax of the file is extremely simple. Whitespace and lines

; beginning with a semicolon are silently ignored (as you probably guessed).

; Section headers (e.g. [Foo]) are also silently ignored, even though

; they might mean something in the future.

; Directives following the section heading [PATH=/www/mysite] only

; apply to PHP files in the /www/mysite directory. Directives

; following the section heading [HOST=www.example.com] only apply to

; PHP files served from www.example.com. Directives set in these

; special sections cannot be overridden by user-defined INI files or

; at runtime. Currently, [PATH=] and [HOST=] sections only work under

; CGI/FastCGI.

; https://php.net/ini.sections

; Directives are specified using the following syntax:

; directive = value

; Directive names are case sensitive - foo=bar is different from FOO=bar.

; Directives are variables used to configure PHP or PHP extensions.

; There is no name validation. If PHP can't find an expected

; directive because it is not set or is mistyped, a default value will be used.

; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one

; of the INI constants (On, Off, True, False, Yes, No and None) or an expression

; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a

; previously set variable or directive (e.g. ${foo})

; Expressions in the INI file are limited to bitwise operators and parentheses:

; | bitwise OR

; ^ bitwise XOR

; & bitwise AND

; ~ bitwise NOT

; ! boolean NOT

; Boolean flags can be turned on using the values 1, On, True or Yes.

; They can be turned off using the values 0, Off, False or No.

; An empty string can be denoted by simply not writing anything after the equal

; sign, or by using the None keyword:

; foo = ; sets foo to an empty string

; foo = None ; sets foo to an empty string

; foo = "None" ; sets foo to the string 'None'

; If you use constants in your value, and these constants belong to a

; dynamically loaded extension (either a PHP extension or a Zend extension),

; you may only use these constants after the line that loads the extension.

;;;;;;;;;;;;;;;;;;;

; About this file ;

;;;;;;;;;;;;;;;;;;;

; PHP comes packaged with two INI files. One that is recommended to be used

; in production environments and one that is recommended to be used in

; development environments.

; php.ini-production contains settings which hold security, performance and

; best practices at its core. But please be aware, these settings may break

; compatibility with older or less security conscience applications. We

; recommending using the production ini in production and testing environments.

; php.ini-development is very similar to its production variant, except it is

; much more verbose when it comes to errors. We recommend using the

; development version only in development environments, as errors shown to

; application users can inadvertently leak otherwise secure information.

; This is the php.ini-production INI file.

;;;;;;;;;;;;;;;;;;;

; Quick Reference ;

;;;;;;;;;;;;;;;;;;;

; The following are all the settings which are different in either the production

; or development versions of the INIs with respect to PHP's default behavior.

; Please see the actual settings later in the document for more details as to why

; we recommend these changes in PHP's behavior.

; display_errors

; Default Value: On

; Development Value: On

; Production Value: Off

; display_startup_errors

; Default Value: On

; Development Value: On

; Production Value: Off

; error_reporting

; Default Value: E_ALL

; Development Value: E_ALL

; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT

; log_errors

; Default Value: Off

; Development Value: On

; Production Value: On

; max_input_time

; Default Value: -1 (Unlimited)

; Development Value: 60 (60 seconds)

; Production Value: 60 (60 seconds)

; output_buffering

; Default Value: Off

; Development Value: 4096

; Production Value: 4096

; register_argc_argv

; Default Value: On

; Development Value: Off

; Production Value: Off

; request_order

; Default Value: None

; Development Value: "GP"

; Production Value: "GP"

; session.gc_divisor

; Default Value: 100

; Development Value: 1000

; Production Value: 1000

; session.sid_bits_per_character

; Default Value: 4

; Development Value: 5

; Production Value: 5

; short_open_tag

; Default Value: On

; Development Value: Off

; Production Value: Off

; variables_order

; Default Value: "EGPCS"

; Development Value: "GPCS"

; Production Value: "GPCS"

; zend.exception_ignore_args

; Default Value: Off

; Development Value: Off

; Production Value: On

; zend.exception_string_param_max_len

; Default Value: 15

; Development Value: 15

; Production Value: 0

;;;;;;;;;;;;;;;;;;;;

; php.ini Options ;

;;;;;;;;;;;;;;;;;;;;

; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"

;user_ini.filename = ".user.ini"

; To disable this feature set this option to an empty value

;user_ini.filename =

; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)

;user_ini.cache_ttl = 300

;;;;;;;;;;;;;;;;;;;;

; Language Options ;

;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.

; https://php.net/engine

engine = On

; This directive determines whether or not PHP will recognize code between

; <? and ?> tags as PHP source which should be processed as such. It is

; generally recommended that <?php and ?> should be used and that this feature

; should be disabled, as enabling it may result in issues when generating XML

; documents, however this remains supported for backward compatibility reasons.

; Note that this directive does not control the <?= shorthand tag, which can be

; used regardless of this directive.

; Default Value: On

; Development Value: Off

; Production Value: Off

; https://php.net/short-open-tag

short_open_tag = On

; The number of significant digits displayed in floating point numbers.

; https://php.net/precision

precision = 14

; Output buffering is a mechanism for controlling how much output data

; (excluding headers and cookies) PHP should keep internally before pushing that

; data to the client. If your application's output exceeds this setting, PHP

; will send that data in chunks of roughly the size you specify.

; Turning on this setting and managing its maximum buffer size can yield some

; interesting side-effects depending on your application and web server.

; You may be able to send headers and cookies after you've already sent output

; through print or echo. You also may see performance benefits if your server is

; emitting less packets due to buffered output versus PHP streaming the output

; as it gets it. On production servers, 4096 bytes is a good setting for performance

; reasons.

; Note: Output buffering can also be controlled via Output Buffering Control

; functions.

; Possible Values:

; On = Enabled and buffer is unlimited. (Use with caution)

; Off = Disabled

; Integer = Enables the buffer and sets its maximum size in bytes.

; Note: This directive is hardcoded to Off for the CLI SAPI

; Default Value: Off

; Development Value: 4096

; Production Value: 4096

; https://php.net/output-buffering

output_buffering = 4096

; You can redirect all of the output of your scripts to a function. For

; example, if you set output_handler to "mb_output_handler", character

; encoding will be transparently converted to the specified encoding.

; Setting any output handler automatically turns on output buffering.

; Note: People who wrote portable scripts should not depend on this ini

; directive. Instead, explicitly set the output handler using ob_start().

; Using this ini directive may cause problems unless you know what script

; is doing.

; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"

; and you cannot use both "ob_gzhandler" and "zlib.output_compression".

; Note: output_handler must be empty if this is set 'On' !!!!

; Instead you must use zlib.output_handler.

; https://php.net/output-handler

;output_handler =

; URL rewriter function rewrites URL on the fly by using

; output buffer. You can set target tags by this configuration.

; "form" tag is special tag. It will add hidden input tag to pass values.

; Refer to session.trans_sid_tags for usage.

; Default Value: "form="

; Development Value: "form="

; Production Value: "form="

;url_rewriter.tags

; URL rewriter will not rewrite absolute URL nor form by default. To enable

; absolute URL rewrite, allowed hosts must be defined at RUNTIME.

; Refer to session.trans_sid_hosts for more details.

; Default Value: ""

; Development Value: ""

; Production Value: ""

;url_rewriter.hosts

; Transparent output compression using the zlib library

; Valid values for this option are 'off', 'on', or a specific buffer size

; to be used for compression (default is 4KB)

; Note: Resulting chunk size may vary due to nature of compression. PHP

; outputs chunks that are few hundreds bytes each as a result of

; compression. If you prefer a larger chunk size for better

; performance, enable output_buffering in addition.

; Note: You need to use zlib.output_handler instead of the standard

; output_handler, or otherwise the output will be corrupted.

; https://php.net/zlib.output-compression

zlib.output_compression = Off

; https://php.net/zlib.output-compression-level

;zlib.output_compression_level = -1

; You cannot specify additional output handlers if zlib.output_compression

; is activated here. This setting does the same as output_handler but in

; a different order.

; https://php.net/zlib.output-handler

;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flush itself

; automatically after every output block. This is equivalent to calling the

; PHP function flush() after each and every call to print() or echo() and each

; and every HTML block. Turning this option on has serious performance

; implications and is generally recommended for debugging purposes only.

; https://php.net/implicit-flush

; Note: This directive is hardcoded to On for the CLI SAPI

implicit_flush = Off

; The unserialize callback function will be called (with the undefined class'

; name as parameter), if the unserializer finds an undefined class

; which should be instantiated. A warning appears if the specified function is

; not defined, or if the function doesn't include/implement the missing class.

; So only set this entry, if you really want to implement such a

; callback-function.

unserialize_callback_func =

; The unserialize_max_depth specifies the default depth limit for unserialized

; structures. Setting the depth limit too high may result in stack overflows

; during unserialization. The unserialize_max_depth ini setting can be

; overridden by the max_depth option on individual unserialize() calls.

; A value of 0 disables the depth limit.

;unserialize_max_depth = 4096

; When floats & doubles are serialized, store serialize_precision significant

; digits after the floating point. The default value ensures that when floats

; are decoded with unserialize, the data will remain the same.

; The value is also used for json_encode when encoding double values.

; If -1 is used, then dtoa mode 0 is used which automatically select the best

; precision.

serialize_precision = -1

; open_basedir, if set, limits all file operations to the defined directory

; and below. This directive makes most sense if used in a per-directory

; or per-virtualhost web server configuration file.

; Note: disables the realpath cache

; https://php.net/open-basedir

;open_basedir =

; This directive allows you to disable certain functions.

; It receives a comma-delimited list of function names.

; https://php.net/disable-functions

disable_functions = pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wifcontinued,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority,exec,system,passthru,shell_exec,proc_open,popen

; This directive allows you to disable certain classes.

; It receives a comma-delimited list of class names.

; https://php.net/disable-classes

disable_classes =

; Colors for Syntax Highlighting mode. Anything that's acceptable in

; <span style="color: ???????"> would work.

; https://php.net/syntax-highlighting

;highlight.string = #DD0000

;highlight.comment = #FF9900

;highlight.keyword = #007700

;highlight.default = #0000BB

;highlight.html = #000000

; If enabled, the request will be allowed to complete even if the user aborts

; the request. Consider enabling it if executing long requests, which may end up

; being interrupted by the user or a browser timing out. PHP's default behavior

; is to disable this feature.

; https://php.net/ignore-user-abort

;ignore_user_abort = On

; Determines the size of the realpath cache to be used by PHP. This value should

; be increased on systems where PHP opens many files to reflect the quantity of

; the file operations performed.

; Note: if open_basedir is set, the cache is disabled

; https://php.net/realpath-cache-size

;realpath_cache_size = 4096k

; Duration of time, in seconds for which to cache realpath information for a given

; file or directory. For systems with rarely changing files, consider increasing this

; value.

; https://php.net/realpath-cache-ttl

;realpath_cache_ttl = 120

; Enables or disables the circular reference collector.

; https://php.net/zend.enable-gc

zend.enable_gc = On

; If enabled, scripts may be written in encodings that are incompatible with

; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such

; encodings. To use this feature, mbstring extension must be enabled.

;zend.multibyte = Off

; Allows to set the default encoding for the scripts. This value will be used

; unless "declare(encoding=...)" directive appears at the top of the script.

; Only affects if zend.multibyte is set.

;zend.script_encoding =

; Allows to include or exclude arguments from stack traces generated for exceptions.

; In production, it is recommended to turn this setting on to prohibit the output

; of sensitive information in stack traces

; Default Value: Off

; Development Value: Off

; Production Value: On

zend.exception_ignore_args = On

; Allows setting the maximum string length in an argument of a stringified stack trace

; to a value between 0 and 1000000.

; This has no effect when zend.exception_ignore_args is enabled.

; Default Value: 15

; Development Value: 15

; Production Value: 0

; In production, it is recommended to set this to 0 to reduce the output

; of sensitive information in stack traces.

zend.exception_string_param_max_len = 0

;;;;;;;;;;;;;;;;;

; Miscellaneous ;

;;;;;;;;;;;;;;;;;

; Decides whether PHP may expose the fact that it is installed on the server

; (e.g. by adding its signature to the Web server header). It is no security

; threat in any way, but it makes it possible to determine whether you use PHP

; on your server or not.

; https://php.net/expose-php

expose_php = Off

;;;;;;;;;;;;;;;;;;;

; Resource Limits ;

;;;;;;;;;;;;;;;;;;;

; Maximum execution time of each script, in seconds

; https://php.net/max-execution-time

; Note: This directive is hardcoded to 0 for the CLI SAPI

max_execution_time = 60

; Maximum amount of time each script may spend parsing request data. It's a good

; idea to limit this time on productions servers in order to eliminate unexpectedly

; long running scripts.

; Note: This directive is hardcoded to -1 for the CLI SAPI

; Default Value: -1 (Unlimited)

; Development Value: 60 (60 seconds)

; Production Value: 60 (60 seconds)

; https://php.net/max-input-time

max_input_time = 60

; Maximum input variable nesting level

; https://php.net/max-input-nesting-level

;max_input_nesting_level = 64

; How many GET/POST/COOKIE input variables may be accepted

max_input_vars = 4000

; How many multipart body parts (combined input variable and file uploads) may

; be accepted.

; Default Value: -1 (Sum of max_input_vars and max_file_uploads)

;max_multipart_body_parts = 1500

; Maximum amount of memory a script may consume

; https://php.net/memory-limit

memory_limit = 1024M

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Error handling and logging ;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; This directive informs PHP of which errors, warnings and notices you would like

; it to take action for. The recommended way of setting values for this

; directive is through the use of the error level constants and bitwise

; operators. The error level constants are below here for convenience as well as

; some common settings and their meanings.

; By default, PHP is set to take action on all errors, notices and warnings EXCEPT

; those related to E_NOTICE and E_STRICT, which together cover best practices and

; recommended coding standards in PHP. For performance reasons, this is the

; recommend error reporting setting. Your production server shouldn't be wasting

; resources complaining about best practices and coding standards. That's what

; development servers and development settings are for.

; Note: The php.ini-development file has this setting as E_ALL. This

; means it pretty much reports everything which is exactly what you want during

; development and early testing.

;

; Error Level Constants:

; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)

; E_ERROR - fatal run-time errors

; E_RECOVERABLE_ERROR - almost fatal run-time errors

; E_WARNING - run-time warnings (non-fatal errors)

; E_PARSE - compile-time parse errors

; E_NOTICE - run-time notices (these are warnings which often result

; from a bug in your code, but it's possible that it was

; intentional (e.g., using an uninitialized variable and

; relying on the fact it is automatically initialized to an

; empty string)

; E_STRICT - run-time notices, enable to have PHP suggest changes

; to your code which will ensure the best interoperability

; and forward compatibility of your code

; E_CORE_ERROR - fatal errors that occur during PHP's initial startup

; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's

; initial startup

; E_COMPILE_ERROR - fatal compile-time errors

; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)

; E_USER_ERROR - user-generated error message

; E_USER_WARNING - user-generated warning message

; E_USER_NOTICE - user-generated notice message

; E_DEPRECATED - warn about code that will not work in future versions

; of PHP

; E_USER_DEPRECATED - user-generated deprecation warnings

;

; Common Values:

; E_ALL (Show all errors, warnings and notices including coding standards.)

; E_ALL & ~E_NOTICE (Show all errors, except for notices)

; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)

; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)

; Default Value: E_ALL

; Development Value: E_ALL

; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT

; https://php.net/error-reporting

error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT

; This directive controls whether or not and where PHP will output errors,

; notices and warnings too. Error output is very useful during development, but

; it could be very dangerous in production environments. Depending on the code

; which is triggering the error, sensitive information could potentially leak

; out of your application such as database usernames and passwords or worse.

; For production environments, we recommend logging errors rather than

; sending them to STDOUT.

; Possible Values:

; Off = Do not display any errors

; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)

; On or stdout = Display errors to STDOUT

; Default Value: On

; Development Value: On

; Production Value: Off

; https://php.net/display-errors

display_errors = Off

; The display of errors which occur during PHP's startup sequence are handled

; separately from display_errors. We strongly recommend you set this to 'off'

; for production servers to avoid leaking configuration details.

; Default Value: On

; Development Value: On

; Production Value: Off

; https://php.net/display-startup-errors

display_startup_errors = Off

; Besides displaying errors, PHP can also log errors to locations such as a

; server-specific log, STDERR, or a location specified by the error_log

; directive found below. While errors should not be displayed on productions

; servers they should still be monitored and logging is a great way to do that.

; Default Value: Off

; Development Value: On

; Production Value: On

; https://php.net/log-errors

log_errors = On

; Do not log repeated messages. Repeated errors must occur in same file on same

; line unless ignore_repeated_source is set true.

; https://php.net/ignore-repeated-errors

ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. When this setting

; is On you will not log errors with repeated messages from different files or

; source lines.

; https://php.net/ignore-repeated-source

ignore_repeated_source = Off

; If this parameter is set to Off, then memory leaks will not be shown (on

; stdout or in the log). This is only effective in a debug compile, and if

; error reporting includes E_WARNING in the allowed list

; https://php.net/report-memleaks

report_memleaks = On

; This setting is off by default.

;report_zend_debug = 0

; Turn off normal error reporting and emit XML-RPC error XML

; https://php.net/xmlrpc-errors

;xmlrpc_errors = 0

; An XML-RPC faultCode

;xmlrpc_error_number = 0

; When PHP displays or logs an error, it has the capability of formatting the

; error message as HTML for easier reading. This directive controls whether

; the error message is formatted as HTML or not.

; Note: This directive is hardcoded to Off for the CLI SAPI

; https://php.net/html-errors

;html_errors = On

; If html_errors is set to On and docref_root is not empty, then PHP

; produces clickable error messages that direct to a page describing the error

; or function causing the error in detail.

; You can download a copy of the PHP manual from https://php.net/docs

; and change docref_root to the base URL of your local copy including the

; leading '/'. You must also specify the file extension being used including

; the dot. PHP's default behavior is to leave these settings empty, in which

; case no links to documentation are generated.

; Note: Never use this feature for production boxes.

; https://php.net/docref-root

; Examples

;docref_root = "/phpmanual/"

; https://php.net/docref-ext

;docref_ext = .html

; String to output before an error message. PHP's default behavior is to leave

; this setting blank.

; https://php.net/error-prepend-string

; Example:

;error_prepend_string = "<span style='color: #ff0000'>"

; String to output after an error message. PHP's default behavior is to leave

; this setting blank.

; https://php.net/error-append-string

; Example:

;error_append_string = "</span>"

; Log errors to specified file. PHP's default behavior is to leave this value

; empty.

; https://php.net/error-log

; Example:

;error_log = php_errors.log

; Log errors to syslog (Event Log on Windows).

;error_log = syslog

; The syslog ident is a string which is prepended to every message logged

; to syslog. Only used when error_log is set to syslog.

;syslog.ident = php

; The syslog facility is used to specify what type of program is logging

; the message. Only used when error_log is set to syslog.

;syslog.facility = user

; Set this to disable filtering control characters (the default).

; Some loggers only accept NVT-ASCII, others accept anything that's not

; control characters. If your logger accepts everything, then no filtering

; is needed at all.

; Allowed values are:

; ascii (all printable ASCII characters and NL)

; no-ctrl (all characters except control characters)

; all (all characters)

; raw (like "all", but messages are not split at newlines)

; https://php.net/syslog.filter

;syslog.filter = ascii

;windows.show_crt_warning

; Default value: 0

; Development value: 0

; Production value: 0

;;;;;;;;;;;;;;;;;

; Data Handling ;

;;;;;;;;;;;;;;;;;

; The separator used in PHP generated URLs to separate arguments.

; PHP's default setting is "&".

; https://php.net/arg-separator.output

; Example:

;arg_separator.output = "&amp;"

; List of separator(s) used by PHP to parse input URLs into variables.

; PHP's default setting is "&".

; NOTE: Every character in this directive is considered as separator!

; https://php.net/arg-separator.input

; Example:

;arg_separator.input = ";&"

; This directive determines which super global arrays are registered when PHP

; starts up. G,P,C,E & S are abbreviations for the following respective super

; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty

; paid for the registration of these arrays and because ENV is not as commonly

; used as the others, ENV is not recommended on productions servers. You

; can still get access to the environment variables through getenv() should you

; need to.

; Default Value: "EGPCS"

; Development Value: "GPCS"

; Production Value: "GPCS";

; https://php.net/variables-order

variables_order = "GPCS"

; This directive determines which super global data (G,P & C) should be

; registered into the super global array REQUEST. If so, it also determines

; the order in which that data is registered. The values for this directive

; are specified in the same manner as the variables_order directive,

; EXCEPT one. Leaving this value empty will cause PHP to use the value set

; in the variables_order directive. It does not mean it will leave the super

; globals array REQUEST empty.

; Default Value: None

; Development Value: "GP"

; Production Value: "GP"

; https://php.net/request-order

request_order = "GP"

; This directive determines whether PHP registers $argv & $argc each time it

; runs. $argv contains an array of all the arguments passed to PHP when a script

; is invoked. $argc contains an integer representing the number of arguments

; that were passed when the script was invoked. These arrays are extremely

; useful when running scripts from the command line. When this directive is

; enabled, registering these variables consumes CPU cycles and memory each time

; a script is executed. For performance reasons, this feature should be disabled

; on production servers.

; Note: This directive is hardcoded to On for the CLI SAPI

; Default Value: On

; Development Value: Off

; Production Value: Off

; https://php.net/register-argc-argv

register_argc_argv = Off

; When enabled, the ENV, REQUEST and SERVER variables are created when they're

; first used (Just In Time) instead of when the script starts. If these

; variables are not used within a script, having this directive on will result

; in a performance gain. The PHP directive register_argc_argv must be disabled

; for this directive to have any effect.

; https://php.net/auto-globals-jit

auto_globals_jit = On

; Whether PHP will read the POST data.

; This option is enabled by default.

; Most likely, you won't want to disable this option globally. It causes $_POST

; and $_FILES to always be empty; the only way you will be able to read the

; POST data will be through the php://input stream wrapper. This can be useful

; to proxy requests or to process the POST data in a memory efficient fashion.

; https://php.net/enable-post-data-reading

;enable_post_data_reading = Off

; Maximum size of POST data that PHP will accept.

; Its value may be 0 to disable the limit. It is ignored if POST data reading

; is disabled through enable_post_data_reading.

; https://php.net/post-max-size

post_max_size = 100M

; Automatically add files before PHP document.

; https://php.net/auto-prepend-file

auto_prepend_file =

; Automatically add files after PHP document.

; https://php.net/auto-append-file

auto_append_file =

; By default, PHP will output a media type using the Content-Type header. To

; disable this, simply set it to be empty.

;

; PHP's built-in default media type is set to text/html.

; https://php.net/default-mimetype

default_mimetype = "text/html"

; PHP's default character set is set to UTF-8.

; https://php.net/default-charset

default_charset = "UTF-8"

; PHP internal character encoding is set to empty.

; If empty, default_charset is used.

; https://php.net/internal-encoding

;internal_encoding =

; PHP input character encoding is set to empty.

; If empty, default_charset is used.

; https://php.net/input-encoding

;input_encoding =

; PHP output character encoding is set to empty.

; If empty, default_charset is used.

; See also output_buffer.

; https://php.net/output-encoding

;output_encoding =

;;;;;;;;;;;;;;;;;;;;;;;;;

; Paths and Directories ;

;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: "/path1:/path2"

;include_path = ".:/usr/share/php"

;

; Windows: "\path1;\path2"

;include_path = ".;c:\php\includes"

;

; PHP's default setting for include_path is ".;/path/to/php/pear"

; https://php.net/include-path

; The root of the PHP pages, used only if nonempty.

; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root

; if you are running php as a CGI under any web server (other than IIS)

; see documentation for security issues. The alternate is to use the

; cgi.force_redirect configuration below

; https://php.net/doc-root

doc_root =

; The directory under which PHP opens the script using /~username used only

; if nonempty.

; https://php.net/user-dir

user_dir =

; Directory in which the loadable extensions (modules) reside.

; https://php.net/extension-dir

;extension_dir = "./"

; On windows:

;extension_dir = "ext"

; Directory where the temporary files should be placed.

; Defaults to the system default (see sys_get_temp_dir)

;sys_temp_dir = "/tmp"

; Whether or not to enable the dl() function. The dl() function does NOT work

; properly in multithreaded servers, such as IIS or Zeus, and is automatically

; disabled on them.

; https://php.net/enable-dl

enable_dl = Off

; cgi.force_redirect is necessary to provide security running PHP as a CGI under

; most web servers. Left undefined, PHP turns this on by default. You can

; turn it off here AT YOUR OWN RISK

; You CAN safely turn this off for IIS, in fact, you MUST.

; https://php.net/cgi.force-redirect

;cgi.force_redirect = 1

; if cgi.nph is enabled it will force cgi to always sent Status: 200 with

; every request. PHP's default behavior is to disable this feature.

;cgi.nph = 1

; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape

; (iPlanet) web servers, you MAY need to set an environment variable name that PHP

; will look for to know it is OK to continue execution. Setting this variable MAY

; cause security issues, KNOW WHAT YOU ARE DOING FIRST.

; https://php.net/cgi.redirect-status-env

;cgi.redirect_status_env =

; cgi.fix_pathinfo provides real PATH_INFO/PATH_TRANSLATED support for CGI. PHP's

; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok

; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting

; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting

; of zero causes PHP to behave as before. Default is 1. You should fix your scripts

; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.

; https://php.net/cgi.fix-pathinfo

;cgi.fix_pathinfo=1

; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside

; of the web tree and people will not be able to circumvent .htaccess security.

;cgi.discard_path=1

; FastCGI under IIS supports the ability to impersonate

; security tokens of the calling client. This allows IIS to define the

; security context that the request runs under. mod_fastcgi under Apache

; does not currently support this feature (03/17/2002)

; Set to 1 if running under IIS. Default is zero.

; https://php.net/fastcgi.impersonate

;fastcgi.impersonate = 1

; Disable logging through FastCGI connection. PHP's default behavior is to enable

; this feature.

;fastcgi.logging = 0

; cgi.rfc2616_headers configuration option tells PHP what type of headers to

; use when sending HTTP response code. If set to 0, PHP sends Status: header that

; is supported by Apache. When this option is set to 1, PHP will send

; RFC2616 compliant header.

; Default is zero.

; https://php.net/cgi.rfc2616-headers

;cgi.rfc2616_headers = 0

; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #!

; (shebang) at the top of the running script. This line might be needed if the

; script support running both as stand-alone script and via PHP CGI<. PHP in CGI

; mode skips this line and ignores its content if this directive is turned on.

; https://php.net/cgi.check-shebang-line

;cgi.check_shebang_line=1

;;;;;;;;;;;;;;;;

; File Uploads ;

;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.

; https://php.net/file-uploads

file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not

; specified).

; https://php.net/upload-tmp-dir

;upload_tmp_dir =

; Maximum allowed size for uploaded files.

; https://php.net/upload-max-filesize

upload_max_filesize = 100M

; Maximum number of files that can be uploaded via a single request

max_file_uploads = 20

;;;;;;;;;;;;;;;;;;

; Fopen wrappers ;

;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.

; https://php.net/allow-url-fopen

allow_url_fopen = On

; Whether to allow include/require to open URLs (like https:// or ftp://) as files.

; https://php.net/allow-url-include

allow_url_include = Off

; Define the anonymous ftp password (your email address). PHP's default setting

; for this is empty.

; https://php.net/from

;from="john@doe.com"

; Define the User-Agent string. PHP's default setting for this is empty.

; https://php.net/user-agent

;user_agent="PHP"

; Default timeout for socket based streams (seconds)

; https://php.net/default-socket-timeout

default_socket_timeout = 60

; If your scripts have to deal with files from Macintosh systems,

; or you are running on a Mac and need to deal with files from

; unix or win32 systems, setting this flag will cause PHP to

; automatically detect the EOL character in those files so that

; fgets() and file() will work regardless of the source of the file.

; https://php.net/auto-detect-line-endings

;auto_detect_line_endings = Off

;;;;;;;;;;;;;;;;;;;;;;

; Dynamic Extensions ;

;;;;;;;;;;;;;;;;;;;;;;

; If you wish to have an extension loaded automatically, use the following

; syntax:

;

; extension=modulename

;

; For example:

;

; extension=mysqli

;

; When the extension library to load is not located in the default extension

; directory, You may specify an absolute path to the library file:

;

; extension=/path/to/extension/mysqli.so

;

; Note : The syntax used in previous PHP versions ('extension=<ext>.so' and

; 'extension='php_<ext>.dll') is supported for legacy reasons and may be

; deprecated in a future PHP major version. So, when it is possible, please

; move to the new ('extension=<ext>) syntax.

;

; Notes for Windows environments :

;

; - Many DLL files are located in the extensions/ (PHP 4) or ext/ (PHP 5+)

; extension folders as well as the separate PECL DLL download (PHP 5+).

; Be sure to appropriately set the extension_dir directive.

;

;extension=bz2

; The ldap extension must be before curl if OpenSSL 1.0.2 and OpenLDAP is used

; otherwise it results in segfault when unloading after using SASL.

; See https://github.com/php/php-src/issues/8620 for more info.

;extension=ldap

;extension=curl

;extension=ffi

;extension=ftp

;extension=fileinfo

;extension=gd

;extension=gettext

;extension=gmp

;extension=intl

;extension=imap

;extension=mbstring

;extension=exif ; Must be after mbstring as it depends on it

;extension=mysqli

;extension=oci8_12c ; Use with Oracle Database 12c Instant Client

;extension=oci8_19 ; Use with Oracle Database 19 Instant Client

;extension=odbc

;extension=openssl

;extension=pdo_firebird

;extension=pdo_mysql

;extension=pdo_oci

;extension=pdo_odbc

;extension=pdo_pgsql

;extension=pdo_sqlite

;extension=pgsql

;extension=shmop

; The MIBS data available in the PHP distribution must be installed.

; See https://www.php.net/manual/en/snmp.installation.php

;extension=snmp

;extension=soap

;extension=sockets

;extension=sodium

;extension=sqlite3

;extension=tidy

;extension=xsl

;zend_extension=opcache

;;;;;;;;;;;;;;;;;;;

; Module Settings ;

;;;;;;;;;;;;;;;;;;;

[CLI Server]

; Whether the CLI web server uses ANSI color coding in its terminal output.

cli_server.color = On

[Date]

; Defines the default timezone used by the date functions

; https://php.net/date.timezone

date.timezone = UTC

; https://php.net/date.default-latitude

;date.default_latitude = 31.7667

; https://php.net/date.default-longitude

;date.default_longitude = 35.2333

; https://php.net/date.sunrise-zenith

;date.sunrise_zenith = 90.833333

; https://php.net/date.sunset-zenith

;date.sunset_zenith = 90.833333

[filter]

; https://php.net/filter.default

;filter.default = unsafe_raw

; https://php.net/filter.default-flags

;filter.default_flags =

[iconv]

; Use of this INI entry is deprecated, use global input_encoding instead.

; If empty, default_charset or input_encoding or iconv.input_encoding is used.

; The precedence is: default_charset < input_encoding < iconv.input_encoding

;iconv.input_encoding =

; Use of this INI entry is deprecated, use global internal_encoding instead.

; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.

; The precedence is: default_charset < internal_encoding < iconv.internal_encoding

;iconv.internal_encoding =

; Use of this INI entry is deprecated, use global output_encoding instead.

; If empty, default_charset or output_encoding or iconv.output_encoding is used.

; The precedence is: default_charset < output_encoding < iconv.output_encoding

; To use an output encoding conversion, iconv's output handler must be set

; otherwise output encoding conversion cannot be performed.

;iconv.output_encoding =

[imap]

; rsh/ssh logins are disabled by default. Use this INI entry if you want to

; enable them. Note that the IMAP library does not filter mailbox names before

; passing them to rsh/ssh command, thus passing untrusted data to this function

; with rsh/ssh enabled is insecure.

;imap.enable_insecure_rsh=0

[intl]

;intl.default_locale =

; This directive allows you to produce PHP errors when some error

; happens within intl functions. The value is the level of the error produced.

; Default is 0, which does not produce any errors.

;intl.error_level = E_WARNING

;intl.use_exceptions = 0

[sqlite3]

; Directory pointing to SQLite3 extensions

; https://php.net/sqlite3.extension-dir

;sqlite3.extension_dir =

; SQLite defensive mode flag (only available from SQLite 3.26+)

; When the defensive flag is enabled, language features that allow ordinary

; SQL to deliberately corrupt the database file are disabled. This forbids

; writing directly to the schema, shadow tables (eg. FTS data tables), or

; the sqlite_dbpage virtual table.

; https://www.sqlite.org/c3ref/c_dbconfig_defensive.html

; (for older SQLite versions, this flag has no use)

;sqlite3.defensive = 1

[Pcre]

; PCRE library backtracking limit.

; https://php.net/pcre.backtrack-limit

;pcre.backtrack_limit=100000

; PCRE library recursion limit.

; Please note that if you set this value to a high number you may consume all

; the available process stack and eventually crash PHP (due to reaching the

; stack size limit imposed by the Operating System).

; https://php.net/pcre.recursion-limit

;pcre.recursion_limit=100000

; Enables or disables JIT compilation of patterns. This requires the PCRE

; library to be compiled with JIT support.

;pcre.jit=1

[Pdo]

; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"

; https://php.net/pdo-odbc.connection-pooling

;pdo_odbc.connection_pooling=strict

[Pdo_mysql]

; Default socket name for local MySQL connects. If empty, uses the built-in

; MySQL defaults.

pdo_mysql.default_socket=

[Phar]

; https://php.net/phar.readonly

;phar.readonly = On

; https://php.net/phar.require-hash

;phar.require_hash = On

;phar.cache_list =

[mail function]

; For Win32 only.

; https://php.net/smtp

SMTP = localhost

; https://php.net/smtp-port

smtp_port = 25

; For Win32 only.

; https://php.net/sendmail-from

;sendmail_from = me@example.com

; For Unix only. You may supply arguments as well (default: "sendmail -t -i").

; https://php.net/sendmail-path

;sendmail_path =

; Force the addition of the specified parameters to be passed as extra parameters

; to the sendmail binary. These parameters will always replace the value of

; the 5th parameter to mail().

;mail.force_extra_parameters =

; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename

mail.add_x_header = Off

; The path to a log file that will log all mail() calls. Log entries include

; the full path of the script, line number, To address and headers.

;mail.log =

; Log mail to syslog (Event Log on Windows).

;mail.log = syslog

[ODBC]

; https://php.net/odbc.default-db

;odbc.default_db = Not yet implemented

; https://php.net/odbc.default-user

;odbc.default_user = Not yet implemented

; https://php.net/odbc.default-pw

;odbc.default_pw = Not yet implemented

; Controls the ODBC cursor model.

; Default: SQL_CURSOR_STATIC (default).

;odbc.default_cursortype

; Allow or prevent persistent links.

; https://php.net/odbc.allow-persistent

odbc.allow_persistent = On

; Check that a connection is still valid before reuse.

; https://php.net/odbc.check-persistent

odbc.check_persistent = On

; Maximum number of persistent links. -1 means no limit.

; https://php.net/odbc.max-persistent

odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.

; https://php.net/odbc.max-links

odbc.max_links = -1

; Handling of LONG fields. Returns number of bytes to variables. 0 means

; passthru.

; https://php.net/odbc.defaultlrl

odbc.defaultlrl = 4096

; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.

; See the documentation on odbc_binmode and odbc_longreadlen for an explanation

; of odbc.defaultlrl and odbc.defaultbinmode

; https://php.net/odbc.defaultbinmode

odbc.defaultbinmode = 1

[MySQLi]

; Maximum number of persistent links. -1 means no limit.

; https://php.net/mysqli.max-persistent

mysqli.max_persistent = -1

; Allow accessing, from PHP's perspective, local files with LOAD DATA statements

; https://php.net/mysqli.allow_local_infile

;mysqli.allow_local_infile = On

; It allows the user to specify a folder where files that can be sent via LOAD DATA

; LOCAL can exist. It is ignored if mysqli.allow_local_infile is enabled.

;mysqli.local_infile_directory =

; Allow or prevent persistent links.

; https://php.net/mysqli.allow-persistent

mysqli.allow_persistent = On

; Maximum number of links. -1 means no limit.

; https://php.net/mysqli.max-links

mysqli.max_links = -1

; Default port number for mysqli_connect(). If unset, mysqli_connect() will use

; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the

; compile-time value defined MYSQL_PORT (in that order). Win32 will only look

; at MYSQL_PORT.

; https://php.net/mysqli.default-port

mysqli.default_port = 3306

; Default socket name for local MySQL connects. If empty, uses the built-in

; MySQL defaults.

; https://php.net/mysqli.default-socket

mysqli.default_socket =

; Default host for mysqli_connect() (doesn't apply in safe mode).

; https://php.net/mysqli.default-host

mysqli.default_host =

; Default user for mysqli_connect() (doesn't apply in safe mode).

; https://php.net/mysqli.default-user

mysqli.default_user =

; Default password for mysqli_connect() (doesn't apply in safe mode).

; Note that this is generally a bad idea to store passwords in this file.

; Any user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")

; and reveal this password! And of course, any users with read access to this

; file will be able to reveal the password as well.

; https://php.net/mysqli.default-pw

mysqli.default_pw =

; Allow or prevent reconnect

mysqli.reconnect = Off

; If this option is enabled, closing a persistent connection will rollback

; any pending transactions of this connection, before it is put back

; into the persistent connection pool.

;mysqli.rollback_on_cached_plink = Off

[mysqlnd]

; Enable / Disable collection of general statistics by mysqlnd which can be

; used to tune and monitor MySQL operations.

mysqlnd.collect_statistics = On

; Enable / Disable collection of memory usage statistics by mysqlnd which can be

; used to tune and monitor MySQL operations.

mysqlnd.collect_memory_statistics = Off

; Records communication from all extensions using mysqlnd to the specified log

; file.

; https://php.net/mysqlnd.debug

;mysqlnd.debug =

; Defines which queries will be logged.

;mysqlnd.log_mask = 0

; Default size of the mysqlnd memory pool, which is used by result sets.

;mysqlnd.mempool_default_size = 16000

; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.

;mysqlnd.net_cmd_buffer_size = 2048

; Size of a pre-allocated buffer used for reading data sent by the server in

; bytes.

;mysqlnd.net_read_buffer_size = 32768

; Timeout for network requests in seconds.

;mysqlnd.net_read_timeout = 31536000

; SHA-256 Authentication Plugin related. File with the MySQL server public RSA

; key.

;mysqlnd.sha256_server_public_key =

[OCI8]

; Connection: Enables privileged connections using external

; credentials (OCI_SYSOPER, OCI_SYSDBA)

; https://php.net/oci8.privileged-connect

;oci8.privileged_connect = Off

; Connection: The maximum number of persistent OCI8 connections per

; process. Using -1 means no limit.

; https://php.net/oci8.max-persistent

;oci8.max_persistent = -1

; Connection: The maximum number of seconds a process is allowed to

; maintain an idle persistent connection. Using -1 means idle

; persistent connections will be maintained forever.

; https://php.net/oci8.persistent-timeout

;oci8.persistent_timeout = -1

; Connection: The number of seconds that must pass before issuing a

; ping during oci_pconnect() to check the connection validity. When

; set to 0, each oci_pconnect() will cause a ping. Using -1 disables

; pings completely.

; https://php.net/oci8.ping-interval

;oci8.ping_interval = 60

; Connection: Set this to a user chosen connection class to be used

; for all pooled server requests with Oracle 11g Database Resident

; Connection Pooling (DRCP). To use DRCP, this value should be set to

; the same string for all web servers running the same application,

; the database pool must be configured, and the connection string must

; specify to use a pooled server.

;oci8.connection_class =

; High Availability: Using On lets PHP receive Fast Application

; Notification (FAN) events generated when a database node fails. The

; database must also be configured to post FAN events.

;oci8.events = Off

; Tuning: This option enables statement caching, and specifies how

; many statements to cache. Using 0 disables statement caching.

; https://php.net/oci8.statement-cache-size

;oci8.statement_cache_size = 20

; Tuning: Enables statement prefetching and sets the default number of

; rows that will be fetched automatically after statement execution.

; https://php.net/oci8.default-prefetch

;oci8.default_prefetch = 100

; Compatibility. Using On means oci_close() will not close

; oci_connect() and oci_new_connect() connections.

; https://php.net/oci8.old-oci-close-semantics

;oci8.old_oci_close_semantics = Off

[PostgreSQL]

; Allow or prevent persistent links.

; https://php.net/pgsql.allow-persistent

pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect().

; Auto reset feature requires a little overheads.

; https://php.net/pgsql.auto-reset-persistent

pgsql.auto_reset_persistent = Off

; Maximum number of persistent links. -1 means no limit.

; https://php.net/pgsql.max-persistent

pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.

; https://php.net/pgsql.max-links

pgsql.max_links = -1

; Ignore PostgreSQL backends Notice message or not.

; Notice message logging require a little overheads.

; https://php.net/pgsql.ignore-notice

pgsql.ignore_notice = 0

; Log PostgreSQL backends Notice message or not.

; Unless pgsql.ignore_notice=0, module cannot log notice message.

; https://php.net/pgsql.log-notice

pgsql.log_notice = 0

[bcmath]

; Number of decimal digits for all bcmath functions.

; https://php.net/bcmath.scale

bcmath.scale = 0

[browscap]

; https://php.net/browscap

;browscap = extra/browscap.ini

[Session]

; Handler used to store/retrieve data.

; https://php.net/session.save-handler

session.save_handler = files

; Argument passed to save_handler. In the case of files, this is the path

; where data files are stored. Note: Windows users have to change this

; variable in order to use PHP's session functions.

;

; The path can be defined as:

;

; session.save_path = "N;/path"

;

; where N is an integer. Instead of storing all the session files in

; /path, what this will do is use subdirectories N-levels deep, and

; store the session data in those directories. This is useful if

; your OS has problems with many files in one directory, and is

; a more efficient layout for servers that handle many sessions.

;

; NOTE 1: PHP will not create this directory structure automatically.

; You can use the script in the ext/session dir for that purpose.

; NOTE 2: See the section on garbage collection below if you choose to

; use subdirectories for session storage

;

; The file storage module creates files using mode 600 by default.

; You can change that by using

;

; session.save_path = "N;MODE;/path"

;

; where MODE is the octal representation of the mode. Note that this

; does not overwrite the process's umask.

; https://php.net/session.save-path

;session.save_path = "/var/lib/php/sessions"

; Whether to use strict session mode.

; Strict session mode does not accept an uninitialized session ID, and

; regenerates the session ID if the browser sends an uninitialized session ID.

; Strict mode protects applications from session fixation via a session adoption

; vulnerability. It is disabled by default for maximum compatibility, but

; enabling it is encouraged.

; https://wiki.php.net/rfc/strict_sessions

session.use_strict_mode = 0

; Whether to use cookies.

; https://php.net/session.use-cookies

session.use_cookies = 1

; https://php.net/session.cookie-secure

;session.cookie_secure =

; This option forces PHP to fetch and use a cookie for storing and maintaining

; the session id. We encourage this operation as it's very helpful in combating

; session hijacking when not specifying and managing your own session id. It is

; not the be-all and end-all of session hijacking defense, but it's a good start.

; https://php.net/session.use-only-cookies

session.use_only_cookies = 1

; Name of the session (used as cookie name).

; https://php.net/session.name

session.name = PHPSESSID

; Initialize session on request startup.

; https://php.net/session.auto-start

session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.

; https://php.net/session.cookie-lifetime

session.cookie_lifetime = 0

; The path for which the cookie is valid.

; https://php.net/session.cookie-path

session.cookie_path = /

; The domain for which the cookie is valid.

; https://php.net/session.cookie-domain

session.cookie_domain =

; Whether or not to add the httpOnly flag to the cookie, which makes it

; inaccessible to browser scripting languages such as JavaScript.

; https://php.net/session.cookie-httponly

session.cookie_httponly =

; Add SameSite attribute to cookie to help mitigate Cross-Site Request Forgery (CSRF/XSRF)

; Current valid values are "Strict", "Lax" or "None". When using "None",

; make sure to include the quotes, as none is interpreted like false in ini files.

; https://tools.ietf.org/html/draft-west-first-party-cookies-07

session.cookie_samesite =

; Handler used to serialize data. php is the standard serializer of PHP.

; https://php.net/session.serialize-handler

session.serialize_handler = php

; Defines the probability that the 'garbage collection' process is started on every

; session initialization. The probability is calculated by using gc_probability/gc_divisor,

; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.

; Default Value: 1

; Development Value: 1

; Production Value: 1

; https://php.net/session.gc-probability

session.gc_probability = 0

; Defines the probability that the 'garbage collection' process is started on every

; session initialization. The probability is calculated by using gc_probability/gc_divisor,

; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.

; For high volume production servers, using a value of 1000 is a more efficient approach.

; Default Value: 100

; Development Value: 1000

; Production Value: 1000

; https://php.net/session.gc-divisor

session.gc_divisor = 1000

; After this number of seconds, stored data will be seen as 'garbage' and

; cleaned up by the garbage collection process.

; https://php.net/session.gc-maxlifetime

session.gc_maxlifetime = 1440

; NOTE: If you are using the subdirectory option for storing session files

; (see session.save_path above), then garbage collection does not

; happen automatically. You will need to do your own garbage

; collection through a shell script, cron entry, or some other method.

; For example, the following script is the equivalent of setting

; session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):

; find /path/to/sessions -cmin +24 -type f | xargs rm

; Check HTTP Referer to invalidate externally stored URLs containing ids.

; HTTP_REFERER has to contain this substring for the session to be

; considered as valid.

; https://php.net/session.referer-check

session.referer_check =

; Set to {nocache,private,public,} to determine HTTP caching aspects

; or leave this empty to avoid sending anti-caching headers.

; https://php.net/session.cache-limiter

session.cache_limiter = nocache

; Document expires after n minutes.

; https://php.net/session.cache-expire

session.cache_expire = 180

; trans sid support is disabled by default.

; Use of trans sid may risk your users' security.

; Use this option with caution.

; - User may send URL contains active session ID

; to other person via. email/irc/etc.

; - URL that contains active session ID may be stored

; in publicly accessible computer.

; - User may access your site with the same session ID

; always using URL stored in browser's history or bookmarks.

; https://php.net/session.use-trans-sid

session.use_trans_sid = 0

; Set session ID character length. This value could be between 22 to 256.

; Shorter length than default is supported only for compatibility reason.

; Users should use 32 or more chars.

; https://php.net/session.sid-length

; Default Value: 32

; Development Value: 26

; Production Value: 26

session.sid_length = 26

; The URL rewriter will look for URLs in a defined set of HTML tags.

; <form> is special; if you include them here, the rewriter will

; add a hidden <input> field with the info which is otherwise appended

; to URLs. <form> tag's action attribute URL will not be modified

; unless it is specified.

; Note that all valid entries require a "=", even if no value follows.

; Default Value: "a=href,area=href,frame=src,form="

; Development Value: "a=href,area=href,frame=src,form="

; Production Value: "a=href,area=href,frame=src,form="

; https://php.net/url-rewriter.tags

session.trans_sid_tags = "a=href,area=href,frame=src,form="

; URL rewriter does not rewrite absolute URLs by default.

; To enable rewrites for absolute paths, target hosts must be specified

; at RUNTIME. i.e. use ini_set()

; <form> tags is special. PHP will check action attribute's URL regardless

; of session.trans_sid_tags setting.

; If no host is defined, HTTP_HOST will be used for allowed host.

; Example value: php.net,www.php.net,wiki.php.net

; Use "," for multiple hosts. No spaces are allowed.

; Default Value: ""

; Development Value: ""

; Production Value: ""

;session.trans_sid_hosts=""

; Define how many bits are stored in each character when converting

; the binary hash data to something readable.

; Possible values:

; 4 (4 bits: 0-9, a-f)

; 5 (5 bits: 0-9, a-v)

; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")

; Default Value: 4

; Development Value: 5

; Production Value: 5

; https://php.net/session.hash-bits-per-character

session.sid_bits_per_character = 5

; Enable upload progress tracking in $_SESSION

; Default Value: On

; Development Value: On

; Production Value: On

; https://php.net/session.upload-progress.enabled

;session.upload_progress.enabled = On

; Cleanup the progress information as soon as all POST data has been read

; (i.e. upload completed).

; Default Value: On

; Development Value: On

; Production Value: On

; https://php.net/session.upload-progress.cleanup

;session.upload_progress.cleanup = On

; A prefix used for the upload progress key in $_SESSION

; Default Value: "upload_progress_"

; Development Value: "upload_progress_"

; Production Value: "upload_progress_"

; https://php.net/session.upload-progress.prefix

;session.upload_progress.prefix = "upload_progress_"

; The index name (concatenated with the prefix) in $_SESSION

; containing the upload progress information

; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"

; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"

; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"

; https://php.net/session.upload-progress.name

;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"

; How frequently the upload progress should be updated.

; Given either in percentages (per-file), or in bytes

; Default Value: "1%"

; Development Value: "1%"

; Production Value: "1%"

; https://php.net/session.upload-progress.freq

;session.upload_progress.freq = "1%"

; The minimum delay between updates, in seconds

; Default Value: 1

; Development Value: 1

; Production Value: 1

; https://php.net/session.upload-progress.min-freq

;session.upload_progress.min_freq = "1"

; Only write session data when session data is changed. Enabled by default.

; https://php.net/session.lazy-write

;session.lazy_write = On

[Assertion]

; Switch whether to compile assertions at all (to have no overhead at run-time)

; -1: Do not compile at all

; 0: Jump over assertion at run-time

; 1: Execute assertions

; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1)

; Default Value: 1

; Development Value: 1

; Production Value: -1

; https://php.net/zend.assertions

zend.assertions = -1

; Assert(expr); active by default.

; https://php.net/assert.active

;assert.active = On

; Throw an AssertionError on failed assertions

; https://php.net/assert.exception

;assert.exception = On

; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active)

; https://php.net/assert.warning

;assert.warning = On

; Don't bail out by default.

; https://php.net/assert.bail

;assert.bail = Off

; User-function to be called if an assertion fails.

; https://php.net/assert.callback

;assert.callback = 0

[COM]

; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs

; https://php.net/com.typelib-file

;com.typelib_file =

; allow Distributed-COM calls

; https://php.net/com.allow-dcom

;com.allow_dcom = true

; autoregister constants of a component's typelib on com_load()

; https://php.net/com.autoregister-typelib

;com.autoregister_typelib = true

; register constants casesensitive

; https://php.net/com.autoregister-casesensitive

;com.autoregister_casesensitive = false

; show warnings on duplicate constant registrations

; https://php.net/com.autoregister-verbose

;com.autoregister_verbose = true

; The default character set code-page to use when passing strings to and from COM objects.

; Default: system ANSI code page

;com.code_page=

; The version of the .NET framework to use. The value of the setting are the first three parts

; of the framework's version number, separated by dots, and prefixed with "v", e.g. "v4.0.30319".

;com.dotnet_version=

[mbstring]

; language for internal character representation.

; This affects mb_send_mail() and mbstring.detect_order.

; https://php.net/mbstring.language

;mbstring.language = Japanese

; Use of this INI entry is deprecated, use global internal_encoding instead.

; internal/script encoding.

; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)

; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.

; The precedence is: default_charset < internal_encoding < iconv.internal_encoding

;mbstring.internal_encoding =

; Use of this INI entry is deprecated, use global input_encoding instead.

; http input encoding.

; mbstring.encoding_translation = On is needed to use this setting.

; If empty, default_charset or input_encoding or mbstring.input is used.

; The precedence is: default_charset < input_encoding < mbstring.http_input

; https://php.net/mbstring.http-input

;mbstring.http_input =

; Use of this INI entry is deprecated, use global output_encoding instead.

; http output encoding.

; mb_output_handler must be registered as output buffer to function.

; If empty, default_charset or output_encoding or mbstring.http_output is used.

; The precedence is: default_charset < output_encoding < mbstring.http_output

; To use an output encoding conversion, mbstring's output handler must be set

; otherwise output encoding conversion cannot be performed.

; https://php.net/mbstring.http-output

;mbstring.http_output =

; enable automatic encoding translation according to

; mbstring.internal_encoding setting. Input chars are

; converted to internal encoding by setting this to On.

; Note: Do not use automatic encoding translation for

; portable libs/applications.

; https://php.net/mbstring.encoding-translation

;mbstring.encoding_translation = Off

; automatic encoding detection order.

; "auto" detect order is changed according to mbstring.language

; https://php.net/mbstring.detect-order

;mbstring.detect_order = auto

; substitute_character used when character cannot be converted

; one from another

; https://php.net/mbstring.substitute-character

;mbstring.substitute_character = none

; Enable strict encoding detection.

;mbstring.strict_detection = Off

; This directive specifies the regex pattern of content types for which mb_output_handler()

; is activated.

; Default: mbstring.http_output_conv_mimetypes=^(text/|application/xhtml\+xml)

;mbstring.http_output_conv_mimetypes=

; This directive specifies maximum stack depth for mbstring regular expressions. It is similar

; to the pcre.recursion_limit for PCRE.

;mbstring.regex_stack_limit=100000

; This directive specifies maximum retry count for mbstring regular expressions. It is similar

; to the pcre.backtrack_limit for PCRE.

;mbstring.regex_retry_limit=1000000

[gd]

; Tell the jpeg decode to ignore warnings and try to create

; a gd image. The warning will then be displayed as notices

; disabled by default

; https://php.net/gd.jpeg-ignore-warning

;gd.jpeg_ignore_warning = 1

[exif]

; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.

; With mbstring support this will automatically be converted into the encoding

; given by corresponding encode setting. When empty mbstring.internal_encoding

; is used. For the decode settings you can distinguish between motorola and

; intel byte order. A decode setting cannot be empty.

; https://php.net/exif.encode-unicode

;exif.encode_unicode = ISO-8859-15

; https://php.net/exif.decode-unicode-motorola

;exif.decode_unicode_motorola = UCS-2BE

; https://php.net/exif.decode-unicode-intel

;exif.decode_unicode_intel = UCS-2LE

; https://php.net/exif.encode-jis

;exif.encode_jis =

; https://php.net/exif.decode-jis-motorola

;exif.decode_jis_motorola = JIS

; https://php.net/exif.decode-jis-intel

;exif.decode_jis_intel = JIS

[Tidy]

; The path to a default tidy configuration file to use when using tidy

; https://php.net/tidy.default-config

;tidy.default_config = /usr/local/lib/php/default.tcfg

; Should tidy clean and repair output automatically?

; WARNING: Do not use this option if you are generating non-html content

; such as dynamic images

; https://php.net/tidy.clean-output

tidy.clean_output = Off

[soap]

; Enables or disables WSDL caching feature.

; https://php.net/soap.wsdl-cache-enabled

soap.wsdl_cache_enabled=1

; Sets the directory name where SOAP extension will put cache files.

; https://php.net/soap.wsdl-cache-dir

soap.wsdl_cache_dir="/tmp"

; (time to live) Sets the number of second while cached file will be used

; instead of original one.

; https://php.net/soap.wsdl-cache-ttl

soap.wsdl_cache_ttl=86400

; Sets the size of the cache limit. (Max. number of WSDL files to cache)

soap.wsdl_cache_limit = 5

[sysvshm]

; A default size of the shared memory segment

;sysvshm.init_mem = 10000

[ldap]

; Sets the maximum number of open links or -1 for unlimited.

ldap.max_links = -1

[dba]

;dba.default_handler=

[opcache]

; Determines if Zend OPCache is enabled

opcache.enable=1

; Determines if Zend OPCache is enabled for the CLI version of PHP

;opcache.enable_cli=0

; The OPcache shared memory storage size.

opcache.memory_consumption=512

; The amount of memory for interned strings in Mbytes.

;opcache.interned_strings_buffer=8

; The maximum number of keys (scripts) in the OPcache hash table.

; Only numbers between 200 and 1000000 are allowed.

opcache.max_accelerated_files=100000

; The maximum percentage of "wasted" memory until a restart is scheduled.

;opcache.max_wasted_percentage=5

; When this directive is enabled, the OPcache appends the current working

; directory to the script key, thus eliminating possible collisions between

; files with the same name (basename). Disabling the directive improves

; performance, but may break existing applications.

;opcache.use_cwd=1

; When disabled, you must reset the OPcache manually or restart the

; webserver for changes to the filesystem to take effect.

;opcache.validate_timestamps=1

; How often (in seconds) to check file timestamps for changes to the shared

; memory storage allocation. ("1" means validate once per second, but only

; once per request. "0" means always validate)

;opcache.revalidate_freq=2

; Enables or disables file search in include_path optimization

;opcache.revalidate_path=0

; If disabled, all PHPDoc comments are dropped from the code to reduce the

; size of the optimized code.

;opcache.save_comments=1

; If enabled, compilation warnings (including notices and deprecations) will

; be recorded and replayed each time a file is included. Otherwise, compilation

; warnings will only be emitted when the file is first cached.

;opcache.record_warnings=0

; Allow file existence override (file_exists, etc.) performance feature.

;opcache.enable_file_override=0

; A bitmask, where each bit enables or disables the appropriate OPcache

; passes

;opcache.optimization_level=0x7FFFBFFF

;opcache.dups_fix=0

; The location of the OPcache blacklist file (wildcards allowed).

; Each OPcache blacklist file is a text file that holds the names of files

; that should not be accelerated. The file format is to add each filename

; to a new line. The filename may be a full path or just a file prefix

; (i.e., /var/www/x blacklists all the files and directories in /var/www

; that start with 'x'). Line starting with a ; are ignored (comments).

;opcache.blacklist_filename=

; Allows exclusion of large files from being cached. By default all files

; are cached.

;opcache.max_file_size=0

; Check the cache checksum each N requests.

; The default value of "0" means that the checks are disabled.

;opcache.consistency_checks=0

; How long to wait (in seconds) for a scheduled restart to begin if the cache

; is not being accessed.

;opcache.force_restart_timeout=180

; OPcache error_log file name. Empty string assumes "stderr".

;opcache.error_log=

; All OPcache errors go to the Web server log.

; By default, only fatal errors (level 0) or errors (level 1) are logged.

; You can also enable warnings (level 2), info messages (level 3) or

; debug messages (level 4).

;opcache.log_verbosity_level=1

; Preferred Shared Memory back-end. Leave empty and let the system decide.

;opcache.preferred_memory_model=

; Protect the shared memory from unexpected writing during script execution.

; Useful for internal debugging only.

;opcache.protect_memory=0

; Allows calling OPcache API functions only from PHP scripts which path is

; started from specified string. The default "" means no restriction

;opcache.restrict_api=

; Mapping base of shared memory segments (for Windows only). All the PHP

; processes have to map shared memory into the same address space. This

; directive allows to manually fix the "Unable to reattach to base address"

; errors.

;opcache.mmap_base=

; Facilitates multiple OPcache instances per user (for Windows only). All PHP

; processes with the same cache ID and user share an OPcache instance.

;opcache.cache_id=

; Enables and sets the second level cache directory.

; It should improve performance when SHM memory is full, at server restart or

; SHM reset. The default "" disables file based caching.

;opcache.file_cache=

; Enables or disables opcode caching in shared memory.

;opcache.file_cache_only=0

; Enables or disables checksum validation when script loaded from file cache.

;opcache.file_cache_consistency_checks=1

; Implies opcache.file_cache_only=1 for a certain process that failed to

; reattach to the shared memory (for Windows only). Explicitly enabled file

; cache is required.

;opcache.file_cache_fallback=1

; Enables or disables copying of PHP code (text segment) into HUGE PAGES.

; Under certain circumstances (if only a single global PHP process is

; started from which all others fork), this can increase performance

; by a tiny amount because TLB misses are reduced. On the other hand, this

; delays PHP startup, increases memory usage and degrades performance

; under memory pressure - use with care.

; Requires appropriate OS configuration.

;opcache.huge_code_pages=0

; Validate cached file permissions.

;opcache.validate_permission=0

; Prevent name collisions in chroot'ed environment.

;opcache.validate_root=0

; If specified, it produces opcode dumps for debugging different stages of

; optimizations.

;opcache.opt_debug_level=0

; Specifies a PHP script that is going to be compiled and executed at server

; start-up.

; https://php.net/opcache.preload

;opcache.preload=

; Preloading code as root is not allowed for security reasons. This directive

; facilitates to let the preloading to be run as another user.

; https://php.net/opcache.preload_user

;opcache.preload_user=

; Prevents caching files that are less than this number of seconds old. It

; protects from caching of incompletely updated files. In case all file updates

; on your site are atomic, you may increase performance by setting it to "0".

;opcache.file_update_protection=2

; Absolute path used to store shared lockfiles (for *nix only).

;opcache.lockfile_path=/tmp

[curl]

; A default value for the CURLOPT_CAINFO option. This is required to be an

; absolute path.

;curl.cainfo =

[openssl]

; The location of a Certificate Authority (CA) file on the local filesystem

; to use when verifying the identity of SSL/TLS peers. Most users should

; not specify a value for this directive as PHP will attempt to use the

; OS-managed cert stores in its absence. If specified, this value may still

; be overridden on a per-stream basis via the "cafile" SSL stream context

; option.

;openssl.cafile=

; If openssl.cafile is not specified or if the CA file is not found, the

; directory pointed to by openssl.capath is searched for a suitable

; certificate. This value must be a correctly hashed certificate directory.

; Most users should not specify a value for this directive as PHP will

; attempt to use the OS-managed cert stores in its absence. If specified,

; this value may still be overridden on a per-stream basis via the "capath"

; SSL stream context option.

;openssl.capath=

[ffi]

; FFI API restriction. Possible values:

; "preload" - enabled in CLI scripts and preloaded files (default)

; "false" - always disabled

; "true" - always enabled

;ffi.enable=preload

; List of headers files to preload, wildcard patterns allowed.

;ffi.preload=

@Cool2Play max_input_time и max_execution_time ставьте по 300, output_buffering Off. Перезагрузка сервера и пробуйте.

Конфиг файла my.cnf покажите

8 минут назад, AHristich said:

@Cool2Play max_input_time и max_execution_time ставьте по 300, output_buffering Off. Перезагрузка сервера и пробуйте.

Конфиг файла my.cnf покажите

# The MariaDB configuration file

#

# The MariaDB/MySQL tools read configuration files in the following order:

# 0. "/etc/mysql/my.cnf" symlinks to this file, reason why all the rest is read.

# 1. "/etc/mysql/mariadb.cnf" (this file) to set global defaults,

# 2. "/etc/mysql/conf.d/*.cnf" to set global options.

# 3. "/etc/mysql/mariadb.conf.d/*.cnf" to set MariaDB-only options.

# 4. "~/.my.cnf" to set user-specific options.

#

# If the same option is defined multiple times, the last one will apply.

#

# One can use all long options that the program supports.

# Run program with --help to get a list of available options and with

# --print-defaults to see which it would actually understand and use.

#

# If you are new to MariaDB, check out https://mariadb.com/kb/en/basic-mariadb-articles/

#

# This group is read both by the client and the server

# use it for options that affect everything

#

[client-server]

# Port or socket location where to connect

# port = 3306

socket = /run/mysqld/mysqld.sock

# Import all .cnf files from configuration directory

!includedir /etc/mysql/conf.d/

!includedir /etc/mysql/mariadb.conf.d/

7 минут назад, Cool2Play said:

# The MariaDB configuration file

#

# The MariaDB/MySQL tools read configuration files in the following order:

# 0. "/etc/mysql/my.cnf" symlinks to this file, reason why all the rest is read.

# 1. "/etc/mysql/mariadb.cnf" (this file) to set global defaults,

# 2. "/etc/mysql/conf.d/*.cnf" to set global options.

# 3. "/etc/mysql/mariadb.conf.d/*.cnf" to set MariaDB-only options.

# 4. "~/.my.cnf" to set user-specific options.

#

# If the same option is defined multiple times, the last one will apply.

#

# One can use all long options that the program supports.

# Run program with --help to get a list of available options and with

# --print-defaults to see which it would actually understand and use.

#

# If you are new to MariaDB, check out https://mariadb.com/kb/en/basic-mariadb-articles/

#

# This group is read both by the client and the server

# use it for options that affect everything

#

[client-server]

# Port or socket location where to connect

# port = 3306

socket = /run/mysqld/mysqld.sock

# Import all .cnf files from configuration directory

!includedir /etc/mysql/conf.d/

!includedir /etc/mysql/mariadb.conf.d/

В панеле есть раздел с его настройкой? Если есть покажите скрин с установлеными лимитами

4 минуты назад, AHristich said:

В панеле есть раздел с его настройкой? Если есть покажите скрин с установлеными лимитами

Нет, это вообще бесплатная панель, которой я и не пользуюсь толком. Намного удобнее и надёжнее через терминал

5 минут назад, Cool2Play said:

Нет, это вообще бесплатная панель, которой я и не пользуюсь толком. Намного удобнее и надёжнее через терминал

Да это понятно. У меня была похожая проблема когда-то,с установкой русского языка. Ошибка вылетала из-за маленьких лимитов в mysql

4 минуты назад, AHristich said:

Да это понятно. У меня была похожая проблема когда-то,с установкой русского языка. Ошибка вылетала из-за маленьких лимитов в mysql

Вот может быть, да. Я ещё недавно пофиксил проблему с /tmp в базе, там разрешений не было и таблицы не кешировались

А, добавлю ещё к основному вопросу. Не помню, указывал или нет, но php не обрабатывает часть запросов. Вот что выводит:

ps aux | grep -c php
31

Попробуйте увеличить лимиты у mysql. Там есть параметр с таймингом кажется,точно не помню как называется,у него значение по-умолчанию 10,а ipc этот параметр хочет =>100. Точнее глянуть могу только вечером,томским.

11 минут назад, Cool2Play said:

А, добавлю ещё к основному вопросу. Не помню, указывал или нет, но php не обрабатывает часть запросов. Вот что выводит:

ps aux | grep -c php
31

Вот это ещё смущает

5 минут назад, Cool2Play said:

Вот это ещё смущает

Команда вам показала что в этот момент работает,т.е запущен 31 процесс.

10 минут назад, AHristich said:

Команда вам показала что в этот момент работает,т.е запущен 31 процесс.

Верно. А в pm.max_children стоит 20, то есть, он не может обработать это всё и не отвечает

22 минуты назад, Cool2Play said:

Верно. А в pm.max_children стоит 20, то есть, он не может обработать это всё и не отвечает

Это значение требует почти тонкой настройки и зависит от размера озу

Средний размер процесса и размер озу.

В вашем случае надо указать 40-80

Начните лучше с 40 и проверяйте.

Что-то не помогло. Всё вышеописанное сделал, после рестарта оооочень долго грузилось, больше трех минут, потом проявилась страница, а после обновления опять висит. Может быть и прогрузится через 3 минуты, но это бред

12 минут назад, Cool2Play said:

Что-то не помогло. Всё вышеописанное сделал, после рестарта оооочень долго грузилось, больше трех минут, потом проявилась страница, а после обновления опять висит. Может быть и прогрузится через 3 минуты, но это бред

поставь на другой хостинг для теста

4 минуты назад, aLEX49566 said:

поставь на другой хостинг для теста

А нету))

27 минут назад, Cool2Play said:

А нету))

Как это нету? 😳

9 минут назад, aLEX49566 said:

Как это нету? 😳

А вот так, времена тяжелые, кризис

13 минут назад, Cool2Play said:

А вот так, времена тяжелые, кризис

Есть бесплатные хостинги. На несколько дней дают вдс для теста

Сами все переносят

36 минут назад, aLEX49566 said:

Сами все переносят

Сразу вспоминается соседская тема, где все хостинги плохие и переносить не умеют 😇